Year End Blowout Sale
Machines on our lot in Woodland, California, priced to sell by December 31. Every tag shows the price and an estimated monthly payment.*
Terex Optima TC55Used 2022$225,000As low as$4,635/mo*
Morbark M20RUsed 2023$325,000As low as$6,695/mo*
Ponsse Scorpion KingUsed 2017$295,000As low as$6,077/mo*
Cat M315F + tree shearUsed 2019$195,000As low as$4,017/mo*
International 7400Used 2011$45,000As low as$927/mo*
Kioti CK3520 HSTNew 2025$27,350As low as$564/mo*
Terex Optima TC55 on a Morooka track carrier
On our lot nowTracked aerial deviceUsed 2022187 hours
$225,000As low as$4,635/mo*estimated, with approved credit. Get my payment quoteAll photos and details for this unit- 60 ft working height
- 42 ft 7 in side reach
- 700 lb platform capacity
- Rubber-track carrier rated for a 12,125 lb payload
- Cat C4.4 engine, Tier 4 Final
For utility and right-of-way crews working where a wheeled bucket truck can’t go.
Reach, capacity and carrier figures are Terex’s and Morooka’s published specifications for these models. Ask us to confirm this unit’s configuration, capacities and inspection records.
Morbark M20R Forestry track chipper
On our lot nowWhole-tree drum chipper on tracksUsed 2023Rental and demo unit
$325,000As low as$6,695/mo*estimated, with approved credit. Get my payment quoteAll photos and details for this unit- 20 in chipping capacity
- 415 hp Cat diesel
- 36 in Advantage 3 drum
- Two-speed track undercarriage
- Wireless remote with a tethered back-up
For in-woods chipping into chip vans, and for operators moving into biomass.
Figures are Morbark’s published specifications for the M20R Forestry Track. Ask us for this unit’s hours, engine plate and discharge chute.
Ponsse Scorpion King with H7 head
On our lot nowEight-wheel harvesterUsed 2017About 7,500 hours
$295,000was- Ponsse H7 harvesting head
- Eight wheels with active stabilisation
- Separate hydraulic pumps for the crane and the head
- Recently demonstrated and fully serviced
- Tires in good condition
For cut-to-length crews in thinning and clear-cut work.
This is the Scorpion generation built before the 2021 redesign. Platform notes are Ponsse’s; condition notes come from Bailey’s listing. Ask us for the engine, crane reach and service records. Shipping is additional.
Cat M315F wheeled excavator with Woodcracker C350 tree shear
On our lot nowWheeled excavator and tree shearUsed 2019
$195,000As low as$4,017/mo*estimated, with approved credit. Get my payment quoteAll photos and details for this unit- Shear cuts up to 16 in softwood, 14 in hardwood
- Grips, then cuts: the gripper closes before the blade
- Cat C4.4 twin-turbo engine, 150 hp net
- Travels at up to 19 mph between sites
- Shear rated for 14 to 20 ton carriers
For land clearing, roadside and power-line tree work.
Figures are Caterpillar’s published M315F specifications and Westtech’s for the Woodcracker C350. Ask us for this unit’s hours and hydraulic set-up.
International 7400 SBA with Altec aerial boom
On our lot nowAerial bucket truckUsed 2011About 40,000 miles
$45,000As low as$927/mo*estimated, with approved credit. Get my payment quoteKnow before you call. Needs a current-year boom certification before it goes to work.
All photos and details for this unit- Altec aerial boom, listed at 100 ft
- International 7400 chassis with a set-back front axle
- Tandem rear axle and steel utility body
For tree-service crews and contractors who need reach on a road chassis.
Ask us for the Altec model and serial number, the engine label and the inspection history before you buy.
Kioti CK3520 HST compact tractor
On our lot nowCompact tractorNew 2025
$27,350As low as$564/mo*estimated, with approved credit. Get my payment quoteAll photos and details for this unit- 34.9 hp Kioti diesel
- Hydrostatic drive: three ranges, twin pedals
- 28.9 hp at the PTO, 540 rpm rear PTO
- 11.7 gpm hydraulic pump
- 24-month warranty plus 6-year powertrain, non-commercial use
For property owners, small ranches, landscapers and contractors.
Figures are Kioti’s published CK3520H specifications. A loader is fitted in the photos; ask what is included with this unit. Bailey’s is an authorized Kioti dealer.
How the monthly number works
- We start from the advertised price on the tag.
- Our lender’s payment factor turns it into an estimated monthly payment.
- Your quote replaces the estimate with real terms: rate, term and down payment, on approved credit.
Financing is offered on new and used equipment, and $0 down is available for qualified buyers.
Pick a machine
Get your payment quote
The figure on the tag is an estimate. Tell us which machine and where it’s going, and we’ll come back with real numbers.
- Your monthly paymentworked out with our lender for the machine you pick
- Delivered pricethe machine and freight to your ZIP, quoted together
- Availabilitywhether it’s still on our lot
Rather talk it through? (707) 600-6696
Put it to work by December 31
Equipment you buy and place in service by December 31, 2026 may qualify for a Section 179 deduction, up to $2.56M for 2026. Used equipment counts when it is new to your business. Bailey’s is a dealer, not a tax advisor, so check your situation with your accountant.
See how Section 179 worksBuying from Bailey’s
- See it first
- The machines are on our lot at 1222 Commerce Ave, Suite D, Woodland, California.
- Financing on new and used
- Through a third-party lender, with approved credit.
- Delivery available
- We quote freight to your ZIP together with the machine.
Sale questions
When does the sale end?
Sale prices run through December 31, 2026, or until a machine sells. Each machine on this page is a single unit, so when it is gone it is gone.
How is the monthly payment worked out?
It is an estimate: the advertised price multiplied by a payment factor from Bailey’s third-party lender. It is not an offer of credit. Your actual payment depends on credit approval, the term, your down payment and the final price. Ask for a payment quote and we will come back with real numbers for the machine you pick.
Can I finance used equipment?
Yes. Bailey’s offers financing on new and used equipment through a third-party lender, subject to credit approval. $0 down is available for qualified buyers.
Does this equipment qualify for Section 179?
Equipment you buy and put to work in your business by December 31, 2026 may qualify, and that includes used equipment that is new to your business. Bailey’s is a dealer, not a tax advisor, so confirm your situation with your accountant.
Can I see a machine before I buy?
Yes. The machines are on our lot at 1222 Commerce Ave, Suite D, Woodland, California. Call (707) 600-6696 to set a time.
Do you deliver?
Delivery is available. Send your ZIP code with the quote request and we will price freight with the machine.
Where do the specifications come from?
Hours, miles and condition come from Bailey’s listing for the unit. Reach, capacity and power figures are the manufacturer’s published specifications for the model. Ask us to confirm the configuration of the unit itself before you buy.
Ask about any machine on this page
Sale prices run through December 31, or until a machine sells.
*Estimated monthly payment, worked out from the advertised price with a payment factor from Bailey’s third-party lender. It is an estimate, not an offer of credit or a commitment to lend. Financing is subject to credit approval; your rate, term, down payment and payment may differ. Tax, freight and fees are not included. Financing is provided by a third-party lender; advertised options may vary, and availability, rates, down payment and final terms depend on lender approval.